M20LPX, M21LPX, M22LPX M72LPX, M73LPX, M75LPX M91VX

Oregon® MultiCut™ is the special purpose chisel chain intended for use by professional woodcutters who work in tough, dirty or abrasive conditions. In sandy areas, fire-damaged forests or other situations likely to damage normal chain.Oregon® MultiCut™ gets the job done while costing substantially less than carbide chains. Available both in 3/8" pitch and .325" pitch chains. NOTE: Oregon® recommends using a machine grinder whenever possible to get the best performance from MultiCut™ chain. MultiCut™ chain is specially built to cut effectively in extremely dirty, abrasive conditions Blued Cutters provide superior corrosion resistance and improved strength “X” grind – Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes

25AP (1/4" Pitch, MICRO-CHISEL®)

Smoothness combined with high cutting performance makes this a versatile member of the OREGON® chain family. 25AP is the replacement chain for small imported saws originally equipped with 1/4" pitch chain. Micro-Chisel® cutters have small-radius working corners that cut fast and are easy to sharpen Small size and light weight make 25AP easy to use and highly maneuverable

26R, 27R, 27RA; 72, 73, 75RA, RD; 95R, 91R (Ripping Chains)

These chains feature a special factory grind for making dimensional boards and planks from larger timbers by cutting parallel to the wood grain or "ripping". Standard chassis and cutter are used. Cutter grind is the only difference from standard chains. This chain type is used in sawmills and is not recommended for hand-held use. Standard chassis and cutter parts are used; cutter grind is the only difference from standard chains For use on chain-type sawmills; not recommended for hand-held use LubriLink™ tie straps help keep oil where it's needed - on the chain

Replacement saw chains should be selected with a view toward the needs,
training and skill of the intended user.